|
|
The Hunter ATX is a high performance cost effective ATX platform industrial motherboard with exceptional expandability, reliability and easy upgradability for the OEM market. The Hunter ATX is specifically designed for industrial applications that require easy connectivity, longevity, and flexibility to accept full-length standard or proprietary ISA and PCI adapters.
The Hunter ATX can be used for diskless workstations in harsh environments that are subject to shock and vibrations. The solid state flash device is a Disk-on-ChipTM with standard 32-pin DIP package and TrueFFS (True Flash File System) technology which can replace a standard hard disk that is often subject to data errors and easily damaged under these conditions.
The Hunter ATX features four 32-bit PCI slots, four 16-bit ISA slots, two USB headers, ULTRA-DMA/EIDE capability allowing high speed data transfer, and complete on-board I/O. The Hunter ATX design is based on the IntelTM 430TXTM chipset and supports three on-board DIMM memory modules for a total up to 256MB on-board.
The Hunter ATX can be configured to accommodate all CPU speeds up
to 300MHz. It can be used with any of the following microprocessors:
| Core Logic Chip-set | Intel 430TX Chip-set | |
| Clock Speed | 50, 60, and 66 MHz | |
| Microprocessor | Support full series of
Intel™ Pentium™ processor up to 300MHz Supports AMD™ K5,k6 up to 300MHz; and Cyrix™ 6x86 (MI) IBM and IDT CPUs On-board adjustable switching power supply for single split plane CPUs |
|
| On board I/O | Two floppies up to 2.88MB
supported Two RS-232 seial ports with 16 bytes FIFO 16550 UART One parallel port (bi-directional, ECP/EPP compatible) PS/2 mouse and PS/2 keyboard connectors Two Universal Serial Bus headers (USB) Dual-Channel PCI 32-bit EIDE controller PIO mode 4 and Bus Master IDE up to 14 MB/sec. supported ULTRA-DMA up to 33 MB/sec. supported LS 120 drive supported |
|
| Memory | Three banks (3 sockets) DIMM up
to 256MB Supports FPM, EDO and SDRAM |
|
| On-Board Flash Disk (Optional Feature) |
On-board single-chip flash disk
device in a standard 32-pin DIP socket Up to 144MB of capacity with high-speed boot-up capabilities Flash File System included (FFS) Perfect HDD subsitution for the harsh shock/vibration environment |
|
| Cache Memory | 256KB pipelined Burst SRAM L2 Cache upgradable to 512KB | |
| On-Board Connectors | ATX power supply connector | |
| RTC/CMOS RAM | 114 bytes of extended AT CMOS RAM with RTC | |
| BIOS | AMI (FLASH BIOS optional) | |
| System Bus | Four 32-bit PCI slots and four 16-bit ISA slots | |
| Board Dimenstion | ATX footprint (8.0" x 12.0") six layers FR4 PCB construction | |
| Environmental Specifications | Temperature 0oC to +55o - operating -40o to +65oC - non-operating |
Humidity 5% to 95% @ 40oC |
© Original Materials of the American Predator Corporation.
A Link is placed to it's Home Page.
Back to Computersmart Home